Plastritrak-SC

Plastritrak-SC

2- pack cold curing solvent free compound, based on acrylic resin for Mechanised Screed Application

Category: 2 Component Cold Plastic Colours Available:
  • White
  • Yellow
  • Blue
  • Green
  • Red
  • Purple
  • Others on request
Benefits:
  • It gives better gloss as compared to synthetic enamel
  • It requires no thinner to thin the paint, only water is required
  • Dries within 10 mins unlike synthetic enamel which takes 60 mins minimum to dry.
Areas of Application:
  • Centre line and Edge Line Markings
Application:
  • "Store in a dry, well-ventilated place.Protect from frost." TRAKMARK - FG will be unusable if it has been allowed to freeze. The recommended storage temperature is 27 degree C. Shelf life is 12 months under normal conditions.
  • Recommended Film Thickness- 0.150 mm (wet)
  • Coverage - Approx. 6m2/litre
  • Specific Gravity (SG)- 1.05
  • Application Temp- Minimum 10 degree C
  • Application Humidity- Maximum 85%
  • Drying Time @25 degree C- 5-10 min(touch dry)
  • "TRAKMARK - FG is supplied in 4, 20 ltr resealable containers."